Testing the Promark3 ... only photos
The course of which I had talked to themWe were doing tests between the Magellan Promark3 GPS, Mobile Mapper 6. Interesting, that in Survey mode a network can be formed, with which the post-processing is done not only with a single device. Under these conditions, it would be possible to have 2-centimeter accuracies in short periods, while with MobileMapper the post-processing only against one computer would take more time to capture in sub-meter.
The chosen place was a picturesque town, with a very irregular topography, typical of these lands. After finding a place where the noise of the fair would affect us less, we started the process.
We forgot that it was necessary to have lunch, the boys, very stacked, even though the weather was crazy, on the first day of the Agatha storm that caused disasters in several Central American countries. By the way I recommend you see the damage monitoring viewer implemented by Segeplan ... well, how much They have advanced These friends since the last time I reviewed them.
Before I start talking about technical results, I leave some photos of what the technical report does not say.
|
|
|
|
|
|
|
Hi Mark.
It can not; The Mobile Mapper 6 does not support post-processing, it means that it can not capture data as a rover and can then be post-processed based on another device that was used as a base.
From the Mobile Mapper line, they only support post-processing: Mobile Mapper Pro, Mobile Mapper CX, Mobile Mapper 100 and ProMark.
regards
Good afternoon, I would like to know if you can help me out of a doubt. Look, I have a Promark 3 rtk GPS and a magellan mobile mapper 6 and I would like to know if there is a way to use both as a base (promark) and rover the browser. If you can, you can tell me how the configuration is done